KS-930 WATER-CURED POLYURETHANE WATERPROOF COATING
1. The introduction of the material
KS-930 is one component creamy white liquid prepared by advance technology and modern production device. In the course of construction, water, as the cross-linking agent, is directly added into the coating whose active group will react with the water molecule and cure, then it will form a rubberized waterproof film.
2. Product Feature
2.1. Single component packing. Water is curing agent; no solvent violate, non-toxic, odorless, not polluted, self-leveling, quick curing and simple construction.
2.2. Advanced constructing methods: widespread construction can use mechanical coating.
2.3. Strong bonding ability to substrate. Applicable to wet substrate. High tensile strength and elongation. Good adaptability to the deformation of substrate.
2.4. Heat and coldness resistance.(-40~95℃). Chemical corrosion resistance.
2.5. Make colors as customized requirements to reach decorative effect.
2.6. High solid content:≥92%. Use less material per square meter.
3. Application range
3.1. Non-exposed roof, underground, bathroom and kitchen and indoor water proof of high-grade communities and high-standard building
3.2. Swimming pool, fountain pool, bathroom pool and drinking water construction.
3.3. Subway, tunnel and underground construction
4. Implement standard
Q/SDKS 023-2013（refer to GB/T19250-2013）
5. Physical and chemical property
Tensile strength，MPa ≥
Elongation at break，% ≥
Tear strength，N/mm ≥
Low temperature flexibility，℃ ≤
Watertightness 0.3MPa 30min
Solid content，% ≥
Surface drying time，h ≤
Fully drying time，h ≤