Dedicated Waterproof Mortar For Wall (E-18)
E-lokt E-18 waterproof mortar to choose polymer waterproof emusion and a variety of inorganic material compounded aggregate and addictives.
Where to useBetween the building's exterior wall, waterproof anti-seepage whole, hutch defends, underground buildings, elevators, irrigation channels and reservoirs, indoor, edible and non-edible sink, floor waterproof. Construction Technology
- Harmless, avirulent environmental protection coating, waterproof steam penetration
- It is waterproof layer on the surface of pits, easy to with strong adornment layer, or layer binding
- The acid and alkali resistance, corrosion resistance, aging resistance
- Frost prevention, anti-freezing salt, can be used as anti-corrosion coating, waterproof layer can be directly in the upper decorative layer
- Easy to use, waterproof effect is remarkable.
- Stay construction base surface must be clean, strong, no oil, and it is loose attachments and wet, but there can be no water
- According to the mix proportioning, side to start the slow blender, side will join the rest of the liquid powder slowly, fully mixing 2 to 3 minutes, until not uniform slurry containing particles can be used; Mixing ratio: 【liquid: powder = 1:4 (weight ratio) 】
- The slurry mixture should be finished in 30 minutes, each measuring unfavorable and over much, appropriate namely distribution box
- Directly with brush besmear to brush on the base, using uniform, do not leak brush, general besmear two to three layers; At room temperature, the first layer construction completion can be carried out on 12 hours after the second construction
- Pipe fitting appropriate USES soft elastic K11 waterproof seal type high elastic waterproof coating and glass fiber cloth strengthening seal processing
- Operation should keep continuous stirring to prevent slurry in the process of precipitation.