Cookie Img
Back to top
   Call Me Free Offline
Home » Products » Waterproof Coatings » Waterproofing Plaster

Waterproofing Plaster

Waterproofing Plaster
Waterproofing Plaster
Product Code : 03
Product Description

K11 Flexible Plaster Waterproof Coating (E - 103)

Polymercement waterproof coating (JSlll type) is a kind of two-component polymer modified cement based waterproof coating, the product by the polymer emulsion additive and a good selection of high quality cement, graded aggregate and additives with powder.

Liquid and powder in certain proportion to cooperate after forming a layer of flexible

waterproof film, the film has good affinity to concrete and mortar, able to combine closely

with the formation of strong permanent, prevent water infiltration, so as to achieve excellent waterproof effect.

Where to use

Apply to the following moistureproof waterproof engineering

  • The hutch room, pool, swimming pool waterproof seepage control
  • The overall waterproof interior walls
  • Suitable for the activity of the smaller use. At the local level.

Product Features

  • The waterproof layer can be directly paste adornment layer after dry solid
  • Can effectively avoid whiskering phenomenon
  • Have certain flexibility, and strong stick relay at the grass-roots level
  • Can be in damp base surface construction
  • Non-toxic, water-based environmentally friendly products
  •  Two-component water-based polymer waterproof coating

Construction method

The base surface treatment: base should level off, without empty drum, remove all dust, oil stains, dirt and other loose materials, apparent porosity, sand holes must be filled with cement mortar. Such as high temperature or the base surface is dry, humid construction before application of water base without water shall prevail;

Mix: add powder slowly into the liquid material, fully mixing 1 to 2 minutes, to observe the mixed slurry for excluding group homogeneous colloidal material can be used. Recommend the use of low-speed electric blender mixing in order to obtain the best mixing effect;

Construction: the good pulp mixing with brush or roller coating on to the construction of the base surface, generally need to besmear to brush two to three times, each time the brushing time interval before a layer of dry solid and is not glue the hand, and each brushing with a coating on the vertical direction.

Technical Specifications

Item

Index

Solid content%

≥70

Tensile strength

No processingMPa

≥1.8

Elongation at break

No processing%

≥30

Adhesive strength

No processingMPa

≥1.0

Damp grass-roots,Mpa

≥1.0

Impermeability0.3MPa30min

Impermeable

Permeability resistance(back surface of mortar),Mpa

≥0.8

Packaging and Storage

  • Packing: 4.5 kg/set, 9 kg/set, 18 kg/set, (11 + 25) kg/set
  • Auxiliary pipe to prevent sharp and cold, pay attention to protect packaging
  • The product should be stored at 5 ℃ and 40 ℃ ventilated dry room, pay attention to moisture proof.


KESHUN WATERPROOF TECHNOLOGY CO., LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.