Cookie Img
Back to top
   Call Me Free Offline
Home » Products » Waterproof Coatings » Waterproofing Slurry

Waterproofing Slurry

Waterproofing Slurry
Waterproofing Slurry
Product Code : 04
Product Description

K11 Flexible Waterproof Slurry(E-102)

Elokt K11 flexible waterproof coating is a kind of two-component polymer modified cement based waterproof coating. The product consists of imported acrylic polymer emulsion additive and high quality cement, graded aggregate and selection of additives with powder. Liquid and powder in certain proportion to cooperate after forming a layer of flexible waterproof film, the film has good affinity to concrete and mortar, able to combine closely with the formation of strong permanent, prevent water infiltration, so as to achieve excellent waterproof effect.
 
Product Features

  • A two-component cooperate with polymer water-based waterproof coating
  • Has good flexibility, and strong adhesive power at the grass-roots level
  • With excellent water resistance
  • With excellent weatherability
  • Can be in damp base surface construction
  • Can effectively avoid the whiskering phenomenon
  • The waterproof layer can be directly after dry solid paste decorative layer
  • Non-toxic, water-based environmentally friendly products.

Where to use

  • The basement wall, floor, hutch defends, pool, swimming pool, underground garage, etc.
  • Suitable for long-term immersion environment.

Construction Technology

The base surface treatment: base should level off, without empty drum, remove all dust, oil stains, dirt and other loose materials. Apparent porosity, sand holes must be filled with cement mortar. Such as high temperature or the base surface is dry, humid construction before application of water base and no water shall prevail;

Mix: according to the requirements of mixture ratio, add powder slowly into the liquid material, fully mixing 1 to 2 minutes, observe after mixing the slurry for excluding crumb homogeneous colloidal material can be used. Recommend the use of low-speed electric blender mixing in order to obtain the best mixing effect. Mixing ratio

[liquid (additive) : powder = 1:1. 47 (weight ratio)];

Construction: the good pulp mixing with brush or roller coating on to the construction of the base surface, usually need to besmear to brush two to three times; Every time of brushing time interval before a layer of dry solid and is not glue the hand, and each brushing with a coating on the vertical direction.
 
Dosage of reference

Coating thickness is about 1.0 mm, 1.85 Kg / ㎡

Item

Index

Tensile properties

≥1.8Mpa

Elongation at break

≥80%

Permeability resistance (back surface)

≥0.6Mpa

Adhesive strength

≥1.0Mpa

Solid content

≥70%

Impermeability(0.3MPa,30min)

impermeable


KESHUN WATERPROOF TECHNOLOGY CO., LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.